|
LT Valve Manual - 2.0 Disassembly Procedures
|
|
|
|
Remove the handle adapter (3) and stop collar (4). Turn valve over so that adjusting nut (13) is facing up. Leaving the bottom cap screw (1) in place, screw out (turning counter-clockwise) the adjusting nut (13). This will allow the entire internal assembly (adjusting nut (13), plug (11)& inserts (10)) to be removed from the valve pocket at once.
|
Remove the cap screw (1) attaching the plug to the adjusting nut.
|
Remove the plug (11) and inserts (10).
|
Remove the insert o-rings (9), adjusting nut o-rings (12) and plug seals (7).
|
Clean all of the old lubricant and debris from the parts and valve body internal profile.
|
|
|
|
|
|
